Single Cell Horizontal Board End Connectors (Reflow)

Single Cell Horizontal Board End Connectors (Reflow)

Single Cell FAKRA Horizontal Board End Connectors Non-Waterproof, Over Reflow Soldering

1、Basic Introduction
1.1 Performance parameters of FAKRA connectors
According to the parameter requirements in IS0 20860.
Main electrical performance parameters: transmission frequency 0 ~ 4GHz; characteristic impedance of 50 ohms; maximum load current 1A
Main mechanical performance parameters: latch retention force ≥ 100N error-proof force ≥ 40N

1.2 Common Applications
Wireless signal transmission: vehicle AM/FM; GPS; car networking (2~4GHz, including transmission); remote control.
Video signal transmission applications: ADAS-based outbreak, mainly applied to cameras.

1.3 Relevant Standards
Design standard: ISO20860; USCAR18
Verification standards: LV214; USCAR2; USCAR17

1.4 Adaptive Cables
Commonly used cable models: RG 174; RTK 031; RG59; RG179; RG58

1.5 Waterproofing
With the waterproof version of the harness end connector, an IPX7/IPX9K waterproof rating can be achieved at the connector pair mating interface.

2、FAKRA connector structure
2.1 The overall structure of board-end and harness-end connectors
A common FAKRA connector consists of a plastic shell, an outer conductor, a centre conductor, an insulator, a crimp sleeve (harness end connector only) and a secondary lock (harness end connector only).

2.2 Secondary lock, colour + mechanical error protection
Secondary Lock: Ensures that the terminal is mounted in place and increases the retention of the terminal. The secondary lock is usually purple.
Colour + Mechanical Misalignment Prevention: There are structures designed to prevent misalignment at the mating interface of the connector, with different coloured plastic shells for different misalignment prevention structures.

Electrical Characteristics

1) Impedance ：50 Ω, Nominal
2) Frequency range ：DC-6 GHz
3) VSWR(Return loss) ：
DC-2 GHz≤1.4 (15.56 dB)
2-3 GHz≤1.5 (13.98 dB)
3-6 GHz≤1.6 (12.74 dB)
4) Dielectric withstanding voltage：
 800 VRMS, Min.
5) Insulation resistance： ≥100 MΩ
6) Contact resistance：
Original state： ≤10 mΩ
After endurance or environmental tests： ≤40 mΩ

Environmental Properties

1) Temperature range： -40°C To 105°C
2) Thermal shock：-40°C To 85°C, 100 Cycles
3) Vibration＆Mechanical shock：Random,5-10 ms,35Gs,1/2 sine
4) Temperature/Humidity cycling： 40 Cycles,8 Hours/Cycle
5)Adaptability of connector to welding：
reflow soldering： YES
wave soldering：YES

Mechanical Property

1) Outline dimensions Per Drawing

2) Durability： 25 
3) Meet USCAR-2 & USCAR-17

Antenna Communication Application.
RF signals are widely used in vehicle wireless communication system, RF signal transmission connector can bring more data, higher transmission frequency and more stable signal transmission quality so as to bring better driving experience to customers.
Zhuoyuexin FAKRA connector's excellent electrical, mechanical and environmental properties enable it to be widely used in automotive antenna fields such as AMIFM, GPS, Bluetooth, in-car Internet, remote control and keyless access.

Other Hot Products:

360 Panoramic Video Cable
Power Harness
Rf Connection Cables
RF Connectors